BLAUBERG Calm 100mm Black Extractor Fan - CALM BLACK 100 T
Low Noise + Timer
Brilliant bathroom extractor fan with a black finish! Looks the part but is also a very hardworking fan to keep the moisture to a minimum
Blauberg Calm is ideal for zone 1 & 2 being IP45
Complete with an over run timer that can be set from 2 mins to 30 mins
The airflow extract rate is 97 m3/hour that's 27 litres of air per second!!
-
Extra
Fan Type Timer Fan Size 4" / 100mm Fan Mounting Position Wall Blauberg Black Calm Quiet Timer Fan 100mm IP45 (CALMBLACK100T)
Blauberg Calm Low Noise Energy-Efficient Bathroom Extractor Fan 100mm Black - Timer
Sleek 100mm (4") designer extractor fan for bathrooms or kitchens, finished in black.
Delivers an impressive airflow rate of 97 m³/hour (27 l/s) with a built-in anti-backdraft shutter.
German-engineered with anti-vibration mounts for low noise operation, producing just 25 dBA.
Equipped with an adjustable run-on timer for added convenience.In a Nut Shell
The Blauberg Calm series offers a modern range of extractor fans that surpass conventional home ventilators. Designed for optimal performance, the Calm fans provide higher airflow and reduced noise levels. Available in a variety of colours, they are perfect for both contemporary and traditional bathroom, kitchen, or wet room designs.
This range is fully compliant with Building Regulations Parts F and L and can be installed in bathroom zones 1 and 2. The built-in shutter helps prevent backdrafts without requiring an external cover. Multiple control options are available, including pull-cord operation, humidity and moisture sensors, or automatic PIR motion detection
Key Features
- Sleek, designer 100mm (4") extractor fan, ideal for bathrooms and kitchen
- German-engineered for low noise, operating at just 25 dBA.
- Rated IP45, suitable for installation in bathroom zones 1 and 2.
- Mixed flow impeller design allows for longer duct runs.
- 100mm diameter duct connection.
- Impressive airflow of 97 m³/hour (27 l/s).
- Built-in anti-backdraft shutter.
- Supplied with an adjustable run-on timer.
- Can be installed on walls or ceilings.
- Energy rating: A+.
Controls & Wiring
This CALM 100T model includes an integrated adjustable run-on timer, allowing you to set the fan to continue running for 2 to 30 minutes after being turned off. It typically connects to your household lighting circuit and requires live, switched live, and neutral connections.
If the run-on timer is not needed, a link can be made between the L and LT terminals. Be sure to consult a qualified electrician if you require assistance.
Bathroom Zones 1 & 2
Special care is usually required when selecting extractor fans for bathrooms and shower areas, as these zones often need SELV (Safety Extra Low Voltage) 12V fans. However, since the Blauberg Calm fans have a high IP45 rating, they do not require SELV fans. Simply ensure your fan is connected to an RCD (Residual Current Device) for safety.
For further assistance or advice, consult a qualified electrician or contact us.
Specifications
- Impeller Type: Mixed Flow
- Motor Type: AC
- Max Power (Amps): 0.049
- Electrical Supply: 1 Phase 220/250V 50/60Hz
- Size: 100mm diameter
- Max Airflow Rate: 27 l/s (97 m³/hour)
- IP Rating: IP45
- Control Options: Timer
- Colour: Black
- Duct Size: 100mm diameter
- Energy Rating: A+
- Power Consumption: 7.5W